- Aikace-aikacen Belt:Masana'antar Panel Mai Tushen Itace
- Nau'in Ma'aikata:Ci gaba da Biyu Belt Danna
- Belin Karfe:MT1650
- Nau'in Karfe:Bakin Karfe
- Ƙarfin Taurin Kai:1600 Mpa
- Ƙarfin Gajiya:±630 N/mm2
- Tauri:480 HV5
BELIN KARFE DON MATSALA BIYU | MASANA'ANTAR DA BANGARORIN TEKU
Layin samar da matsi mai faɗi na katako yana amfani da tsarin matsi mai bel biyu, wanda ke aiki ta hanyar amfani da bel ɗin ƙarfe na sama da ƙasa. Bel ɗin ƙarfe don masana'antar katako yana da ƙarfin ƙarfi/gajiya mai yawa, tauri da kyakkyawan tsatsa a saman da kuma yanayin zafi, kuma bambancin kauri, madaidaiciya da kuma lanƙwasa duk suna da kyau.
Mashin ɗin bel mai ci gaba da aiki ya ƙunshi bel ɗin ƙarfe guda biyu na sama da ƙasa, wanda shine sabon tsarin mashin ɗin katako, kuma manyan masana'antun mashin ɗin a duk faɗin duniya suna ci gaba da ingantawa da haɓaka wannan mashin ɗin.
Kauri na bel ɗin ƙarfe mai matsewa biyu gabaɗaya yana da girma 4 na 2.3 / 2.7 / 3.0 / 3.5mm, wanda ke da tsada mai yawa. Tsawon rayuwar bel ɗin ƙarfe yana da kimanin shekaru 5-15 bisa ga allunan kauri daban-daban da allunan kayan aiki daban-daban.
Mingke yana samar da bel ɗin bakin ƙarfe MT1650 don layin latsa bel mai bel biyu, wanda shine bel ɗin ƙarfe mai ƙarfi, kuma ana amfani da shi sosai a masana'antar panel na itace.
Ana iya amfani da Bel ɗin Karfe na Mingke a masana'antar katako (WBP) don ci gaba da matsewa don samar da Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Barbashi Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Beneur Beneer ...
Belin Karfe Mai Amfani:
| Samfuri | Nau'in bel | Nau'in injin bugawa |
| ● MT1650 | Belin Bakin Karfe Mai Martensitic | Matsi mai bel biyu, Mende press |
| - | ||
| ● CT1320 | Karfe mai tauri da tsauri | Maɓallin buɗewa guda ɗaya |
| - |
Faɗin Samar da Belin:
| Samfuri | Tsawon | Faɗi | Kauri |
| ● MT1650 | ≤150 m/pc | 1400~3100 mm | 2.3 / 2.7 / 3.0 / 3.5mm |
| 2.3 / 2.7 / 3.0 / 3.5mm | |||
| ● CT1320 | 1.2 / 1.4 / 1.5 mm | ||
| - | 1.2 / 1.4 / 1.5 mm |
A cikin masana'antar katako, akwai nau'ikan injinan latsawa guda uku masu ci gaba:
● Double Belt Press, galibi ana samar da MDF/HDF/PB/OSB/LVL/…
● Mende Press (wanda kuma aka sani da Calender), galibi yana samar da siririn MDF.
● Injin Buɗewa Ɗaya, galibi yana samar da PB/OSB.